其他產品及廠家
1或3驅動設備(s)搖臂開關和按-按鈕開關2單作用氣缸,與空氣節流閥調整驅動速度、高度安裝持有者,有多個可調樣品持有人,安全插座連接外部測試電壓和負載的標本
更新時間:2025-09-08
深圳市奧德賽創精密儀器有限公司的誠信、實力和產品質量獲得業界的認可。歡迎各界朋友蒞臨參觀、指導和業務洽談。請聯系銷售總監：蘇曼
更新時間:2025-09-08
美國ed&d atp-01薄紙/acg-01紗布/acp-01棉 深圳市奧德賽創精密儀器有限公司的誠信、實力和產品質量獲得業界的認可。歡迎各界朋友蒞臨參觀、指導和業務洽談。請聯系銷售總監：蘇曼
更新時間:2025-09-08
model es2000 reach-in humidity chamber，model es2000 reach-in humidity chamber，model es2000 reach-in humidity chamber
更新時間:2025-09-08
lac系列是高性能線桌上型爐,其微處理器為基礎的控制系統允許單點操作,定時功能和斜坡/浸泡48步驟編程。不同大小的lac烤箱是可用的。所有不銹鋼內部模型。
更新時間:2025-09-08
fast, easy to use, accurate and with exceptional user features. simply push one button to switch between inches and millimeters. also has hold and floating zero features. case provided.
更新時間:2025-09-08
深圳市奧德賽創精密儀器有限公司的誠信、實力和產品質量獲得業界的認可。歡迎各界朋友蒞臨參觀、指導和業務洽談。請聯系銷售總監：蘇曼
更新時間:2025-09-08
also includes: custom-cut foam padded carrying case and iso 17025 accredited certificate of calibration - - with specific scope for “accessibility probes”!
更新時間:2025-09-08
this product complies with all iec, en, ce, vde, ul and csa requirements. this is a high-precision, stainless steel device with a delrin® handle and stop.
更新時間:2025-09-08
used to verify protection against access to hazardous parts through top openings. meets iec, en, ul and csa standards including iec 1010, en61010-1, ul3101-1,
更新時間:2025-09-08
the un-jointed/rigid finger probe is made for forceful insertion where the flexibility of the jointed finger probe would be a hindrance
更新時間:2025-09-08
this probe is intended to verify protection of persons against access to hazardous parts for an ip1 code. also used to verify protection from access with the back of the hand for an ip suffix a code.
更新時間:2025-09-08
supplied ready for operation, including certificate confirming calibration by means of a calibration device according to iec 68-2-75 / 1991 appendix a.
更新時間:2025-09-08
the f22.50 uses adjustable energy levels to allow the full range of test settings. this product is a complete impact test
更新時間:2025-09-08
to determine the mechanical strength of electrical appliances or electrical components in accordance with iec, en and vde standards.
更新時間:2025-09-08
to determine the mechanical strength of insulated cords, cables, couplers, plug pin insulating sleeves and enclosures in the cold. in compliance with iec 60811-1-4/ 1985 + corrigendum
更新時間:2025-09-08
this product is intended for drop testing of hand-held irons to clause 21.101 of iec60335-01, en60335-1, ul60335-1, csa60335-1 and similar ul, csa, iec
更新時間:2025-09-08
this tester generates fall-down tests for specimens. the specimen is placed on a platform that falls down 50mm rapidly, in free-fall form. the test equipment is floor standing and consists of:
更新時間:2025-09-08
used to test the hazardous live parts from accessible parts of antenna coaxial sockets mounted on the apparatus; they should withstand mechanical stresses such as endurance, impact, and torque.
更新時間:2025-09-08
designed for impact tests on glass/ceramic panels, the ita-858 is a circular, copper bottomed weight that is repeatedly dropped in order to measure the durability of the specimen.
更新時間:2025-09-08
complies with all iec, en, ul, csa and international standards which require a 50mm diameter, 500g impact ball.
更新時間:2025-09-08
the brand new, ed&d exclusive hot winding resistance measurement system automates and simplifies measurement of the operating temperatures for multiple transformer windings.
更新時間:2025-09-08
the ed&d hot winding resistance measurement system is the industry-standard device that automates and simplifies the task of measuring the operating temperatures of transformer windings
更新時間:2025-09-08
this product measures the temperature in supporting surface and in the fixing surfaces for appliance and luminaries in operatiion-as required by many iec/en standards including
更新時間:2025-09-08
this product is built in exact accordance with various iec, en, ansi, ce, vde, ul (such as ul 858) & csa requirements.
更新時間:2025-09-08
product details this product is for measuring surface temperatures: 10-32 tapped handle for attachment to ed&d force gauges. built according to iec 60335-2-6/fdis: 2002.
更新時間:2025-09-08
the industry´s leading forty channel manual switching temperature meter! settings for °c / °f
更新時間:2025-09-08
twelve channel temperature meter with manual and automatic scanning features.
更新時間:2025-09-08
for measuring current, especially higher currents and quicker than series ammeters. these units are considered the finest available. all units are extremely rugged, reliable, and versatile.
更新時間:2025-09-08
this benchtop single-phase wide range digital power analyzer is fully loaded with measurement features you´d expect on instruments costing three times the price.
更新時間:2025-09-08
the ed&d model 4176 programmable μ-ohmmeter offers super-stable low resistance measurements for hard-to-test items such as transformers, coils, shunts,
更新時間:2025-09-08
for testing the resistance to torque of cord anchorages at electrical appliance provided with non-detachable flexible cords with a diameter up to 10mm and torques up to 0.5 nm.
更新時間:2025-09-08
our state-of-the-art gauges are perfect for laboratory and field testing. extremely rugged, yet accurate.
更新時間:2025-09-08
if you intend to utilize our attachment torque screwdrivers or wrenches, you´ll need to purchase an advanced digital force gauge (afi series).
更新時間:2025-09-08
for measuring torque in the clockwise and counter-clockwise directions
更新時間:2025-09-08
test stand holding pfi digital force gauge with 30 mm disc attachment for pfi-mdd
更新時間:2025-09-08
dz3500型炭黑含量測試儀：該儀器適用于聚乙烯、聚丙烯、聚丁烯塑料中炭黑含量的測定。產品介紹:dz3500型炭黑含量測試儀適用于聚乙烯、聚丙烯、聚丁烯塑料中炭黑含量的測定。炭黑的測試是通過試樣在氮氣保護下，高溫分解后的重量分析得到的。該儀器具有使用方便，操作簡單，工作可靠，測量準確，自動控溫等優點。炭黑的測試是通過試樣在氮氣保護下，高溫分解后的重量分析得到的
更新時間:2025-09-08
hd520型便攜式紅外測溫儀測量模式：z大值、z小值、平均值、差值顯示功能：℃/℉選擇、數據保持、自動關機、低電壓指示、激光選擇、背景光選擇、20點數據記憶
更新時間:2025-09-08
德國maag植絨飛升時間測試儀評價標準導致了對絮凝行為的定量和定性的評估。計時器上讀出的升空時間是主要的評估特征，據此，反對以供應商的規格或與生產有關的自己的決定為代表的群體典型的初始值。如果在電壓開啟時間30后，樣品板上仍有植絨殘留物，則對其進行平衡，并與標準值進行比較。
更新時間:2025-09-08
德國maag 植絨可篩性測試儀產品說明：rpg 1000型可塑度測試儀rpg 1000流動性測試儀用于測量羊群的流動性，從而可以得出關于生產廠中配料行為的結論。特別是在大型工廠中，羊群的流動性是保持質量保證的一個重要參數。流動性測試作為一種連續測試以及短期測試，可用于過程監測。 rpg 1000配備了兩種不同的滾筒篩。篩子的網眼大小從0.6和0.8毫米不等。
更新時間:2025-09-08
柔軟性也是紡織品、皮革、絨布和其他柔軟材料的基本質量特征。 這里測量參數稱為剛度。 我們的 softometers kws 使您能夠在不指定設備參數的情況下比較各種材料的剛度。
更新時間:2025-09-08
德國dustec - scco2 超臨界二氧化碳清潔系統在制造過程中和制造后，從復雜結構中去除加工或加工殘留物、操作材料和輔助材料通常非常困難。 使用超臨界 co2，即使是使用傳統方法幾乎無法處理的組件也可以得到有效清潔。 該過程使用高達 800 bar 的壓力和高達 200 °c 的溫度。
更新時間:2025-09-08
按標準規定的條件，用一定質量的球壓試驗器在一定的溫度(125±2°c），一定的時間下壓入非金屬，非陶瓷材料的表面來檢驗電動工具結構材料耐熱性的試驗。
更新時間:2025-09-08
斯洛文尼亞testing試驗探頭標準：符合gb2009.1-1996；iec884-1.2002斯洛文尼亞testing試驗探棒用途：是進行家用和類似用途電器防觸電保護試驗的bi備器具
更新時間:2025-09-08
斯洛文尼亞testing球壓試驗儀標準：根據gb4706.1-2005、gb2099.1-2008、gb/t5159.21-2006、 iec60695-10-2：2003等標準制作而成。
更新時間:2025-09-08
科研專用化學吸附儀，準確的脈沖定量，高精度耐腐蝕的tcd檢測器、質量流量計，確保數據準確性和數據穩定性。多段程序控溫，更合理的完成程序升溫反應和等溫反應。貫通式強冷系統，確保溫度準確性和降溫升溫速率 文章來源：北京彼奧德電子技術有限公司歡迎大家轉載，轉載請注明出處！(www.bjbiaode.com原文鏈接：http://www.bjbiaode.com/cp/hxxf/20121011/pca1200.html
更新時間:2025-09-08
該裝置適用于兩組氣態進樣，組液態進樣的催化劑評價裝置，通過對壓力、空速、裝樣量、反應溫度的控制，對催化劑的性能進行評價，裝置通過外接色譜對反應產物和尾氣進行分析。 文章來源：北京彼奧德電子技術有限公司歡迎大家轉載，轉載請注明出處！(www.bjbiaode.com原文鏈接：http://www.bjbiaode.com/cp/jqwf/20120926/bingxi.html
更新時間:2025-09-08
石油焦在1300℃煅燒后的真密度的大小是衡量石油焦質量的主要項目，般來講，煅燒后真密度越高，說明這種焦容易石墨化，而且石墨化后電阻率較低、熱膨脹系數較小，石油焦的體積密度表示焦炭結構的致密程度，并且與機械強度成正比。振實密度除與焦炭的體積密度有關外，還和焦炭的顆粒度有關。
更新時間:2025-09-08
最新產品
- 果蠅麻醉機連接管59-124C 2025/9/9 2:47:07
- 麻醉機接頭59-140 2025/9/9 2:46:24
- arosurgica撐開器18.670.16 2025/9/9 2:46:02
- arosurgica撐開器18.802.16 2025/9/9 2:45:00
- arosurgica撐開器18.651.10 2025/9/9 2:44:38
- arosurgica撐開器18.621.10 2025/9/9 2:44:17
- arosurgica剪刀08.369.11 2025/9/9 2:42:53
- arosurgica剪刀07.171.15 2025/9/9 2:42:30
- arosurgica剪刀08.950.18 2025/9/9 2:42:08
- arosurgica剪刀07.281.11 2025/9/9 2:41:26
- arosurgica剪刀08.280.18 2025/9/9 2:40:44
- arosurgica剪刀07.171.17 2025/9/9 2:40:02
- arosurgica剪刀07.194.16TC 2025/9/9 2:38:38
- arosurgica剪刀07.283.23 2025/9/9 2:37:55
- arosurgica剪刀08.831.12 2025/9/9 2:37:12
- arosurgica剪刀07.952.19 2025/9/9 2:36:50
- arosurgica剪刀07.165.17TC 2025/9/9 2:35:26
- arosurgica剪刀07.950.19 2025/9/9 2:35:04
- arosurgica剪刀07.165.23TC 2025/9/9 2:34:42
- arosurgica剪刀07.283.18 2025/9/9 2:32:58
- arosurgica剪刀07.901.18 2025/9/9 2:32:36
- arosurgica剪刀07.285.18TC 2025/9/9 2:32:14
- arosurgica剪刀07.933.15 2025/9/9 2:31:32
- arosurgica剪刀07.282.15 2025/9/9 2:31:10
- arosurgica剪刀07.340.11 2025/9/9 2:29:26
- arosurgica剪刀07.920.23 2025/9/9 2:29:04
- arosurgica剪刀08.341.11 2025/9/9 2:28:43
- arosurgica剪刀07.405.16 2025/9/9 2:28:21
- arosurgica持針鉗24.150.14 2025/9/9 2:26:34
- arosurgica持針鉗24.122.12 2025/9/9 2:26:12