詳技術參數 打 印 : 外部 RS-232重 量 : 2.13磅0.97Kg輸 出 : RS-232C/RS-485 計算機輸出 符 合 : <5% at 2,000,000 粒子/ft3 電 源 : 100V/115V/230V 50Hz/60Hz 尺 寸 : 4"?.9"?.3"10.3cm?7.5cm?.9cm寬*高*深 氣 流 量 : 0.1cfm 數據存儲 : 200個記錄 間隔時間 : 1秒 - 24小時 抽樣時間 : 1秒 - 24小時 粒子操作 : 連續8小時操作 計算數據 : 總計.每升計數 位置標簽 : 0 - 250數字的交流電壓 : 100V/115V/230V 附件選擇 : 溫度感應器、高壓探測器、打印紙 包括設備 : 異動力探頭、提純濾咀、打印紙、手動電源線 尺寸通道 : 1號尺寸固定,2號尺寸可選 型號 227A : 尺寸1: 0.5微米 尺寸2: 可選 0.7微米、1微米、3微米、5微米 型號 227B : 尺寸1: 0.3微米 尺寸2: 可選 0.5微米、1微米、3微米、5微米 在調整時規定: 最小限度尺寸:0.3微米/0.5微米 |
CJ-HLC200 / 200A 空氣LED專用測試儀
規格型號:MetOne 227A/227B
靈敏度0.3um或0.5um,標準流量0.1cfm
2個粒徑通道,五種計數模式
可連續遠程計算機或打印機
可編程選擇四種粒徑之一種為第二粒徑通道
僅重0.97公斤
CJ-HLC300臺式空氣粒子計數器的詳細介紹 | |||||||
|
商品名稱: HLC-100A|手持式激光空氣粒子計數器|粒子計數器|HLC-100A |
市場價格:¥ |
商品型號:HLC-100A |
非會員價:¥19,800.00 |
商品庫存:6 臺 |
商品品牌: 上海智丞電子 |
會 員 價:¥19,500.00 |
上市日期:2007-6-3 |
商品介紹 | |||||||||||||||||||||||||||||
![]() HLC-100A|手持式激光空氣粒子計數器|粒子計數器|HLC-100A ★ HLC100A空氣粒子計數器是用于測量潔凈環境中單位體積內塵埃粒子數和粒徑分布的儀器 ★ 其基本原理是光學傳感器的探測激光經塵埃粒子散射后被光敏元件接收并產生脈沖信號,該脈沖信號被輸出并放大,然后進行數字信號處理,通過與標準粒子信號進行比較,將對比結果用不同的參數表示出來。 ★ 儀器的測量參數設定、測量結果顯示、按鍵、定時、打印、時間、日期、數據存儲等均由內置微機(MCU)控制和實現,儀器可同時顯示環境的溫濕度并監測報告激光粒子傳感器的工作狀態 。 ★ 該粒子計數器按照國際通用標準設計(空氣采樣流量為2.83 升/分), 能同時對設定的六個粒徑檔進行檢測,采樣時間可根據用戶需要任意設定,最長時間59分59秒。采樣數據可儲存在內置的閃存內,并可通過USB下載。 ★ 該儀器在引進美國的技術上進一步創新, 具有測量精度高, 性能穩定, 功能強, 體積小, 操作簡單方便, 達到或超過了國際同類產品的性能指標. ★ 日期和時間顯示; ★ USB高速通信接口可用于與計算機通訊獲取數據、分析、軟件升級等; ★ RJ-45遠程控制通信接口,該接口用來和計算機通訊獲取數據、分析和遠距 ★ 數據存儲器,可存255組測量結果 ★ 內置傳感器能測量溫度、濕度并記錄存儲; HLC-100A|手持式激光空氣粒子計數器|粒子計數器|HLC-100A HLC-100A|手持式激光空氣粒子計數器|粒子計數器|HLC-100A技術參數:
|
227a/b 手持式空氣粒子計數器:
詳細介紹: | ||||||||||||||||
產品介紹: 1.手持式蓄電池操作;2.在 0.1cfm 時,靈敏達到 0.3微米 到 0.5微米;3.同時有兩種計數尺寸;4.5 種計數模式;5.通過 rs-232 輸出到電腦或打印。 技術參數 打 印 : 外部 (rs-232)重 量 : 2.13磅(0.97kg)輸 出 : rs-232c/rs-485 計算機輸出 符 合 : <5% at 2,000,000 粒子/ft3 電 源 : 100v/115v/230v (50hz/60hz) 尺 寸 : 4"×6.9"×2.3"(10.3cm×17.5cm×5.9cm)(寬*高*深) 氣 流 量 : 0.1cfm 數據存儲 : 200個記錄 間隔時間 : 1秒 - 24小時 抽樣時間 : 1秒 - 24小時 粒子操作 : 連續8小時操作 計算數據 : 總計.每升計數 位置標簽 : 0 - 250(數字的)交流電壓 : 100v/115v/230v 附件選擇 : 溫度感應器、高壓探測器、打印紙 包括設備 : 異動力探頭、提純濾咀、打印紙、手動電源線 尺寸通道 : 1號尺寸固定,2號尺寸可選 型號 227a : 尺寸1: 0.5微米 尺寸2: 可選 0.7微米、1微米、3微米、5微米 型號 227b : 尺寸1: 0.3微米 尺寸2: 可選 0.5微米、1微米、3微米、5微米 在調整時規定: 最小限度尺寸:0.3微米/0.5微米 產品特點: ? ac or battery operation? 0.3 micron at 0.1 cfm (227b)? 0.5 micron at 0.1 cfm (227a)? counts 2 sizes simultaneously? stores data from 200 locations? labels data with location? internal rechargeable battery? weighs only 2.1 lbs (0.97 kg)? spreadsheet-compatible data files with particle vision portall? software the model 227 portable airborne particle counter offers the features and sensitivity of larger instruments and easy handheld operation. weighing only two pounds, the model 227 features a sensitivity of 0.3 micron (227b) or a sensitivity of 0.5 micron (227a), is fully self-contained, and uses reliable laser diode technology. it connects to a remote printer or computer, and can be part of a facility-monitoring system. the model 227 counts two sizes of particles simultaneously. sample times can be set for up to 24 hours. count data are stored in memory for easy transfer to a printer or computer. to make the most of its portability, the model 227 features several counting modes for quick analysis of cleanroom conditions. the concentration mode gives a continuously up-dated approximation of the number of particles per cubic foot or per liter. the approximation is based on a user-se-lectable sample period of one to ten seconds. in the auto mode, it automatically takes a specified number of samples and stops, allowing unattended operation. the average mode calculates the average, minimum, and maximum count after a specified number of samples. in beep mode, the model 227 sounds a beep each time it counts a specified number of particles. this is useful for locating leaks in filters. to protect your cleanroom, the model 227 contains an exhaust filter. the pump and sensor are turned off when the battery charge dr-ops below a safe operating level, maintaining power to preserve data stored in memory. the met one model 227: a handful of information. specificationssize channels: model 227b ch 1: 0.3 microns; ch 2: se-lectable - 0.5, 1, 3, or 5model 227a ch 1: 0.5 microns; ch 2: se-lectable - 0.7, 1, 3, or 5flow rate: 0.1 cfm (2.83 lpm)locations labels: 100, appear on printoutdata storage: 200 samples, rotating buffersample time: 1 seconds to 24 hoursinterval time: 1 seconds to 24 hoursdisplay: 4-line lcd; 7 digits for countsconcentration mode: 1 second samples, 1 to 10 samples averaged, display up-dated every second; displays counts per cubic foot or literbattery operation: 8 hours continuous, rechargeable nimh, recharge time 90% in 10 hours, 100% in 12 hourspower: ac adapter or internal battery packweight: 2.1 pounds (0.97 kg)size: 4"w x 6.9"h x 2.3"d (10.3 x 17.5 x 5.9 cm)output: rs-232c/rs-485 for computer or printerenvironment operating: 55 to 84°f (12 to 29°c), 20 to 95% relative humidity, non-condensingenvironment storage: -40 to 160°f (-40 to 70°c), up to 98% relative humidity, non-condensingaccessories included: isokinetic probe (direct mount); purge filter; recharger stand; ac adapter; operator’s manual when ordering, specify: basic sensitivity: 0.3 micron (227b) or 0.5 micron (227a)power (ac): ac adapters for 100 vac, 115 vac, or 230 vac optional accessories relative humidity/temperature sensorhigh pressure diffuserparticle vision portall softwareprinter, externalcarrying/shipping case 技術參數:
|