久久久精品午夜_国产一二三四ts人妖_久久久久成人精品免费播放_日本女人一级片_亚洲射逼_日韩有码第一页

DIW-20CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIW-75CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIW-120CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

最新產品
熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板： 久久一区福利视频国 | 精久久久久久久 | 亚州视频一区二区三区 | 国产成人一区二区三区在线视频 | 午夜在线视频观看 | 日韩性猛交 | 亚洲宅男天堂在线观看无病毒 | 国产丝袜无码一区二区三区视频 | 91精品国产乱码久久桃 | 久久中文字 | 日本一级中文字幕久久久久久 | 久久福利一区 | 可以免费看av的网址 | 亚洲视频六区 | 精品免费av| 麻豆蜜桃九色在线视频 | 成人欧美一区二区三区视频不卡 | 久久久久久久爽 | 韩国一区二区视频 | 神马91| 免费的av网站在线观看 | 亚洲精品久久久久久久久久 | 国产精品黑丝 | 久爱WWW人成免费网站 | 91射网站 | 国产69精品久久99的软件特点 | 在线国产网址 | 亚洲日韩精品无码av海量 | 国产香蕉青春草原久久 | 日本肉体裸交XXXXBBBB | 日本少妇春药特殊按摩3 | 韩国午夜理伦三级在线观看仙踪林 | 成人久久秘 | 国产亚洲精品久久yy50 | 女人色网站 | 曰本无码人妻丰满熟妇啪啪 | 99精品国产一区二区三区在线观看 | 久久久国产精品 | 成人一区二区视频 | 91久久老司机福利精品网 | 极品少妇啪啪高清免费 |