久久久精品午夜_国产一二三四ts人妖_久久久久成人精品免费播放_日本女人一级片_亚洲射逼_日韩有码第一页

DIS-RL6日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL2日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀

扭力校正儀DI-3N-IP5/IP50/IP200/IP500
制 造 商：思達(CEDAR)
產品種類：測力、拉力儀器
所屬行業：電子及電路板工業模具及五金制造行業
  產品  熱賣產品  
產品簡介：
 詳細內容
日本思達牌扭力校正儀

型號

DI-3N-IP5

DI-3N-IP50

DI-3N-IP200

DI-3N-IP500

DI-3N-IPS

測量范圍

0.01～5N.m0.1～50kgf.cm0.1～45Lbf.in

0.01～50N.m0.1～500kgf.cm0. 1～450Lbf.in

0.1～200N.m1～2000kgf.cm1～1800Lbf.in

0.1～500N.m1～5000kgf.cm0.1～4500Lbf.in

0.01～20N.m0.1～200kgf.cm0.1～180Lbf.in

誤差

±0.5%

功能

LC:LCD顯示，RS：RS232C輸出口，LH：扭力設定功能；MY：數據記憶功能PO：電源自動關閉功能IO：設定自動清零

外形尺寸

88(W)×108(D)×40(H)（不含測頭）

配件

包裝盒/AC充電器各一個

AC充電器各一個

測量頭1個DC20mmM4/M6/M8包裝盒AC充電器各一個

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series)  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% (or less 499亇3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (rightleft)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  (one piece each)
 兂4 bits (亄)丂侐0/侐1 6.35HEX bits (亄)丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

該公司產品分類： 喜百事 孔徑規 塞尺 EISEN精密針規 FSK精密水平儀 RIKEN精密水平儀 RSK精密水平儀 ONO SEIKI小野轉速計 ASKER橡膠硬度計 TECLOCK得樂橡膠硬度計 ANRITSU安立溫計 PTC表面溫度計 ISUZU東京溫度計 SATO佐滕溫濕度計 SK 國產放大鏡 OTSUKA大冢臺放大鏡 PEAK放大鏡 張力計 扭力工具 推拉力計

DI-RL05CEDAR思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
DIS-RL6 Measurement to 6 N丒m  
A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂（DIS series）  仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output
Specification DIS-RL05 DIS-RL2 DIS-RL6
Measuring range 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy 亇0.5% （or less 499亇3digit）
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword  
C Real-time output Load torque value is outputted every about1/ 180 second by RS232C.
Decision function Setting of torque value A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance It is a display clearance in set-up time.   （0.5 - 3.0 sec）
One-touch zero A clear button is pushedit is a zero. data output.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data stored
Power supply Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3hours
Continunous working time 10 hours
Meter outside type dimension 100（W） x105（D） x33 （H） （It does not contain by the projection thing.）
Weight Meter part    520g
Bit/Socket part 兂4 HEX 6.35
Accessories  （one piece each）
 兂4 bits （亄）丂侐0/侐1 6.35HEX bits （亄）丂侐1/侐2
Receipt case
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

最新產品
熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板： 一级毛片免费高清视频 | 日本成人在线视频网站 | 日本三级动作片 | 人妻精品制服丝袜久久久 | 一区二区三区国产盗摄 | 免费在线一区二区三区 | 国产丝袜在线观看一区 | 成人久久久久久久久久久 | 国产欧美精品在线 | 国产精品538一区二区在线 | 久久精品国产自在天天线 | 成人久久久精品国产乱码一区二区 | 粉嫩高潮美女一区二区三区 | 日韩性公交车上xxhd | 7777在线 | 亚洲色无码中文字幕YY51999 | 爱爱一级片 | 伊人久久无码中文字幕 | 亚洲精品无码成人A片体验区在线 | 亚洲人成色777777精品音频 | 亚洲一区有码 | a级黑粗大硬长爽猛片视频 人人插天天干 | 午夜欧美不卡 | 欧美专区一区 | 久久久久亚洲精品无码蜜桃 | 亚洲老熟女与小伙bbwtv | 爆乳护士一区二区三区在线播放 | 久久国产在线观看 | 无码人妻精品中文字幕免费时间 | 日韩美女在线免费观看 | 免费无码成人片在线观看 | 免费AV片在线观看网址 | 黄免费在线观看 | 狠狠狠狼鲁欧美综合网 | 台湾佬自拍偷区亚洲综合 | 水菜丽成人av在线亚洲 | 亚洲AV无码成人精品区蜜桃 | 亚洲成人毛片 | 日本成人在线视频网站 | 国产又黄又爽又色在线视频播放 | 午夜高清影院 |