| 特 點: a、儀器靈敏度高，對環境本底亦有響應 b、采用單片機技術，功能多，體積小 c、儀器操作簡單，使用方便 d、累積劑量、劑量率切換顯示 e、抗電磁干擾能力強 技術指標： 1、探測器：硅半導體探測器 2、測量顯示范圍: 劑量率: 0.1 μSv/h~999.9 mSv/h 累計劑量: 0.0 μSv~9999 mSv 3、報警閾: 劑量率: 1 μSv/h~1 Sv/h之間連續可調 累計劑量: 1 μSv~10 Sv之間連續可調 4、報警功能: 以聲（蜂鳴器）、光（LED）及LCD指示進行累積劑量及劑量率超閾、電池欠壓、工作超時和探測器失效報警？稍O置不同累積劑量增量提示聲音（聲響強度 > 80dB, 距劑量儀30cm處）。 5、能量響應:<±20%（48 keV ~ 1.5 MeV） 6、線性誤差：1 μSv/h ~ 1 Sv/h，≤15%。 7、抵沖擊和振動：符合IEC1283標準要求 8、過載特性：大于20 Sv/h 9、電 源:AA型3.6V電池一節，電池壽命 >1000小時 （50 mSv/年,1.8 Ah）。 10、欠壓指示：當電池電壓≤3.1±0.1V時，顯示欠壓符號 11、溫度特性： 0 ~ +40℃測量值變化<±10% -10 ~ +50℃測量值變化<±15% 12、相對濕度: 40% ≤RH≤95% （35℃）時測量值變化<±10% 13、重量：100g 14、尺寸：90×62×25 mm
SDM2000U Personal Dosimeter Function The dosimeter is used to monitor the personal dose equivalent ａnd dose equivalent rate of X, γ radiation. DE, DER ａnd total working time can be read out switched by pressing function button. It incorporates audile, visual ａnd LCD indicator alarms to warn user when preset dose/dose rate threshold levels are exceeded. The threshold can be set random in measurement range. Real-time measurement data can be storage in non-volatile memory that will not lose after power off. Record data can be transmitted through infrared communication to the Record Reader, ａnd the reader can communicates with computer via RS485 mode interface transport. Dosimeter can be used alone or with the reader ａnd computer network data management system. Features 1、Wide-range, low power consumption, resistance to overload 2、Real-time an Non-volatile data record 3、Displaying cumulative dose, dose rate ａnd working hours 4、Audio, visual ａnd LCD indicating over-threshold alarm 5、Threshold can be set in measurement range 6、Standardized measurement data can be managed by professional software via IR communicator 7、Advanced design to ensure the safety ａnd reliability of measurement Specifications 1、measurement range：Hp（10）: 0.01Sv10Sv Hp（10）: 0.1Sv/h1Sv/h 2、Alarm threshold Continuously set .during measurement range for dose ａnd dose rate. Dose increment alarm: can be set during 1Sv999Sv Over time: 16000min 3、Alarm Gives audile, visual ａnd LCD indicating alarm for over-threshold, under-voltage, over time, detector failure ａnd DE increment tips. Sound intensity > 80dB （@30cm） 4、LCD Display Hp（10）: 0.00Sv9999mSv Dose rate Hp（10）: 0.01Sv/h1999mSv/h 5、energy response <±30%（50keV1.5MeV） 6、DR response <±20% （1Sv/h10Sv/h） <±15% （10Sv/h1Sv/h） 7、Overload：>20Sv/h 8、Power：One AA size Lithium Battery 3.6V 9、Battery Life >2000h. 10、8 hours last when under-voltage alarms 11、Temperature <±10%, -10℃+40℃ 12、Humidity <±10%, 40%90%RH（35℃） 13、Weight 95g 14、Dimensions 90×62×25（excluding clip） |
| 供應商：上海仁日輻射防護設備有限公司 |