86BYGH450D-02混合式步進電機
步進電機,混合式步進電機,四相步進電機 基本參數(General Specifications)： 步距角（Step Angle）--- 1.8°/0.9°(full step,half step)步距角精度(Step Angle Accuracy)--------±5%(full step,no load) 電阻精度（Resistance Accuracy）-----±10%電感精度(Inductance Accuracy) ----±20% 溫升(Temperature Rise) 80℃ Max(rated current, 2 phases on) 環境溫度(Ambient Temperature Range)---- -20℃∽+50℃ 絕緣電阻(Insulation Resistance)----- 100MΩ Min. 500VDC 絕緣介電強度（Dielectric Strength） ---750VAC 50Hz 1mA 1 Minute 絕緣等級(Insulation Class)---- B級(130℃級) 軸向變形(Shaft Axial Play)-- 0.08mm Max(450g Load) 徑向跳動 (Shaft Radial Play)-------- 0.02mm Max(450g Load) 最大徑向力(Max. radial force) ------- 220N (20mm from the flange) 最大軸向力(Max. axial force) 60N 旋轉方向(Rotation)--- CW(See From Front Flange)
主要參數(Electrical Specifications):
型 號 Series Model | 機身長L Motor Length (mm) | 保持轉距 Holding Torque (N.m) | 電壓 Rated Voltage (V) | 電流 Rated Current (A) | 電阻 Phase Resistance (Ω) | 電感 Phase Inductance (mH) | 轉動慣量 Rotor Inertia (g.cm²) | 引出線數 Lead Wire | 定位力矩 Detent Torque (kg.cm) | 重量 Motor Weight (kg) |
86BYGH450D-02 | 162.5 | 8.4 | 4.8 | 3 | 4.4 | 21 | 5100 | 8 | 4.8 | 5.5 |
以上產品為基本型，可根據用戶要求訂做派生：軸伸、電流、高低溫、密封等
CD4CD4 多參數氣體測定器
CD4 多參數氣體測定器
產品特點和用途： CD4多參數氣體測定器適用于煤礦井下作業環境中對一氧化碳（CO）、氧氣（O2）、硫化氫（H2S）及甲烷（CH4）氣體濃度的測定和報警。檢測現場中所測氣體濃度超標，儀器可進行聲光報警。并具有操作簡單、體積小、攜帶方便、精度高、價格便宜等特點。 主要性能指標：測量氣體 CO、O2、H2S、CH4 測定原理 電位電解方式（ CO、O2、H2S）催化燃燒原理（CH4） 測量范圍 CO:（0-1000）X10-6O2:（0.0-25.0）%H2S:（0-100） X10-6CH4:（0.00-4.00）% 報警設置 四種氣體全量程內均可設報警點 報警聲級強度 ≥80dB 報警光能見度 ＞20m 響應時間 ＜40s 工作溫度 0-40℃ 相對濕度 ≤98% 工作時間 ≥10h（非報警狀態） 電池型號 1600mAh鋰電池 最高開路電壓 4.2V 額定工作電壓 3.7V 工作電流 135mA（非報警時） 180mA（報警時）
CD4 多參數氣體測定器
SMZ445 SMZ460NIKON體視顯微鏡 SMZ445 SMZ460
體視變焦顯微鏡SMZ445/460
這是兩款最簡潔、最經濟實惠的體視變焦顯微鏡。它們結構設計緊湊，機身輕巧，不僅使用起來相當方便，而且光學性能優良。
SMZ445
CB-4203金圖CB-4203膠圈裝訂機
CB-4203膠圈裝訂機
產皮參數：
操作方式手動打孔，手動壓鉚裝訂
最大打孔裝訂厚度30mm
可調邊孔距離 5-25mm
消耗功率160W
預熱時間3分鐘
可調邊距距離6-20mm
機器重量 4.5kg
機器尺寸 長200*寬310*高480mm
產品特點：
● 辦公型梳式裝訂機
● 膠圈（梳式）裝訂；
● 同類產品中屬超強打孔能力
● 最為堅固合理的全金屬底板設計；
● 打孔、裝訂單獨手柄操作，
● 3孔免打功能設計
● 平推式專利調邊機構；
● 特設符合人體工學原理的長臂手柄，省力，舒適，方便。
專業打孔操作手柄,提高使用工效柄；3刀可調免打設計
更多產品信息請查看：http://www.zknt.com
hr29050MFLGEA德國原裝進口 彩色 黑白SVS工業相機 2900萬CCD 43.47mm靶面 18 6262 70182
- > Progressive scan / global shutter
- > An array of trigger ａnd exposure modes
- > Auto gain ａnd exposure
- > Partial scan
- > M58 lens interface (F-Mount optional)
- > Precise mounting of the sensor for repeatability
- > Industrial housing with changeable lens adapters
- > 14-bit ADC with 8- or 12-bit output
- > Industrial IO interface (0 – 24 V inputs ａnd current-driving outputs)
- > Direct control ａnd driving of LED lighting - built-in LED controller
- > Logical trigger functions
- > Power supply: 10 – 24 VDC
- > Dual GigE Vision data interface (Gigabit Ethernet Standard)
- > Fully GigE Vision ａnd GenIcam standard compliant
- > SDK for Windows (32/64 bit) ａnd Linux available free of charge
- > data rates up to 240 MB/sec
- > Cable lengths up to 100 meters are possible
- > SDK for Windows (32/64 bit) ａnd Linux available
Details Matter
The SVCam-HR series meets exclusive demands to resolution at very high speed.
The SVCam-HR series delivers the highest possible resolutions in the field of industrial image processing ａnd thus offer maximum performance for demanding applications. The high resolution allows to easily ａnd quickly capture a wide field of view, which makes the camera ideal for applications such as optical metrology, quality control or monitoring of large areas.
The GigE camera of the SVCam-HR series impresses with their housing concept, the wide-range lenses ａnd the unique picture quality. Thanks to the dual GigE connection it is possible to achieve a data rate of up to 240 MByte / s. A further advantage is the reliable, cost-effective transmission of the image data over a distance of 100 m with standard network technology. The GigE Vision ａnd GenICam standards ensure rapid integration into the application software.
| HR Series | hr29050MFLGEA |
| Resolution | 6576 x 4384 px |
| Frame rate | 6.2 fps |
| Chroma | mono |
| Interface | Dual GigE Vision |
| Sensor | |
| Sensor | KAI-29050-A |
| Manufacturer | ON Semiconductor |
| Sensor type | Area CCD |
| Sensor architecture | interline transfer |
| Readout type | progressive scan |
| Sensor size (h x v) | 36.17 x 24.11 mm |
| Optical diagonal | 43.47 mm |
| Sensor format | 35mm " |
| Pixel size (h x v) | 5.5 x 5.5 µm |
| Camera | |
| Exposure modes | MANUAL;AUTO;EXTERNAL |
| Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
| Exposure time (min) | 10 µs |
| Exposure time (max) | 60 sec (external ∞) |
| Pixel format / max | mono8 / 8 bit |
| Gain modes / max | manual, / 18 dB |
| SNR | 56 dB / 9.3 bit |
| Pixel clock | 50 MHz |
| Internal memory | 128 MB |
| Feature Set | |
| AOI | yes |
| LUT | yes |
| Offset | yes |
| Readout control | yes |
| Binning | yes |
| Image flip | yes |
| Shading correction | yes |
| Defect pixel correction | yes |
| Tap balancing | manual;auto |
| Housing | |
| Lens mount | M58x0.75 |
| Dimensions (w x h x d) | 70 x 71 x 55.4 mm |
| Weight | 320 g |
| Ambient temperature | -10 to 45 °C |
| Protection class | IP30 |
| I/O-Interfaces | |
| Input up to 24V | 2 x |
| Output open drain | 2 x |
| I/O RS-232 | 1 x |
| I/O RS-422 | 1 x |
| Power supply | 10 to 25 V (DC) |
| Power consumption | 10 W |
